Pumps/Inflation

Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

Heat is the enemy of mini-pumps. More strokes generate more friction which produces more heat—and heat is wasted energy.  Unlike most mini-pumps, Pocket Impero does not suffer from efficiency loss when hot.  Pocket Impero is between a high-pressure and high-volume pump. At 200 strokes the Pocket Impero reaches higher pressures than any other pocketable pump ever tested in the BikeRadar test protocol, meaning that it is pushing more air with fewer losses than pumps of either high-pressure or high-volume designs. The unique Slide-Lock Silicone sleeve improves grip and doubles as a handle lock when in your pocket. - Full alloy construction with CNC alloy head - Premium leather piston gasket and brass check-valve - Slide-Lock Silicone sleeve - Length: 8 in (20.3cm) - Weight: 5.3 oz (150gm) - Pressure at 200 strokes (BikeRadar protocol): 89psi - Warranty: Silca Shield, 25 year hard parts warranty

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

Gear up with the CK-7 Combo Kit with compact Mini Pump. Toss a spare tube in the saddle bag and you've got everything you need to changes flats on the road. Includes: - Mini Pump - 6 Piece Mini Tool - 2 Tire Levers - Medium Saddle Bag - Ballistic Nylon Bottle Cage

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible

Super small and super light, SKS's Supershort Mini Pump is great for the minimalist rider. The head works with both Schrader and Presta valves, and the handle folds into a T for easy pumping.

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Don't let this diminutive pump fool you: SKS' Airboy has big lungs and it's ready to fill your tires quickly. Light and tough, this high-pressure pump fits in your jersey pocket easily and fills your tires up to 115 psi. The unique 2-chamber/2-plunger pumping system provides high pumping efficiency so you get back to your ride quicker. And, at only 62 grams, you'll forget you have this little bad boy when you're not using it.

It's tough to go wrong with the original, and SKS' Airboy XL takes everything you love about Airboy and makes it high-volume specific. The 2-chamber/2-plunger pumping system provides plenty of efficiency, especially considering its tiny size! This high volume pump gets your larger tires up to 75 psi, regardless of whether you're running Presta or Schrader valves. The Airboy XL tackles whatever you're running with surprising toughness and quickness.

Airflex Explorer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for MTB or urban bikes. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 5 bar/73 psi - Compatible with Presta, Schrader, and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 205mm - Weight: 132 grams - Made in Germany

- Great entry level pump in a compact form - Features a steel air chamber plastic base and rubber textured handle for easy grip - Updated MV Easy Head valve allows for Presta/Schrader/Dunlop valves and also is consumer serviceable

SKS's Rennkompressor Floor Pump is a legend. For over four decades, this German work of art has been the go-to pump for countless cyclists the world over. The E.V.A. head works with all valves and the 230 psi/16 bar max pressure can fill even the highest quality track tubulars. Sturdy aluminum construction, an oversize gauge, and a long hose will make it your go-to pump, as well.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.

RockShox simplifies your pack with this HP 2-Stage Air Pump. Throw it in your pack for every ride and you have both a shock and tire pump that boasts a 300psi capacity. The aluminum construction makes it super durable and the head fits both presta and Schrader valves. A large removable gauge is easy to read and the air-release button makes fine tuning pressure in shocks and tires a breeze. And it includes a mounting clip to mount to water bottle bosses.

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

Use pressure to your advantage with Profile Design's CO2 Inflator. Screw on a CO2 cartridge (sold separately), and this chuck is ready to air your tires up to pressure quickly and easily whether you're out on the race course or in the garage prepping for a ride. It's push-activated so you can use only as much CO2 as needed for the inflation task at hand. It's also small enough to fit almost anywhere so you'll always have it along. Best of all, no arm-numbing pumping is required!

Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!

Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.

The Prestaflator ECO is designed with a medium flow trigger valve providing a perfect balance for inflation and seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for Bicycle Mountain & Road tires with a wide range of pressure requirements. Auto-Select Head Presta / Schrader auto-select head engages with a simple flip of the lever. Quick lever release minimizes air loss at disconnect. Quality Prestaflator is engineered specifically for the needs of bicycles and bicyclists. Only top quality materials are used for it’s components. We start with a cast Alloy body and give it a Nickel plated finish. The hose is made of reinforced PVC. It’s more flexible than rubber hoses and is rated for 300 PSI of continuous use. Smooth alloy clamps on the hose are more comfortable for use. The pressure gauge has a durable steel case covered with a rubber shock housing and offers accuracy with +/- 2%. The dial has a bicycle-specific pressure range of 12 Bar/174 PSI. It’s high enough to inflate any daily-use tire, but not excessive so the gauge is easy to read. Prestaflator – The Original Beware of fakes and cheap imitations sold by one-product sellers. These are not real brands that can stand behind your product. Prestacycle is the originator of the Prestaflator. We are a full-line Bicycle tools company providing the Cycling industry globally with world-class tool designs. Our R&D has created a proven design that we have consistently improved-upon through years of experience. Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles. Specifications: - 2" / Steel body dial pressure gauge. - 150 PSI (in 2 PSI increments). - 10.5 Bar (in 0.2 Bar increments). - Copper coil mechanism provides good accuracy. - Polymer Presta / Schrader auto-select head. - Engages any valve with a simple flip of the lever. - Presta AND Schrader - Quick lever release minimizes loss at disconnect. - Replaceable I/M compressor quick-release attachment. - Rubber pressure gauge housing for shock protection. - Cast alloy pistol grip handle with Nickel-plated finish. - Thumb-control pressure release button. - High-pressure hose for easy access on any wheel. Disclaimers Air compressor and air hose with quick release connector required for use – not included. Maximum air pressure is limited by your compressor’s capabilities.

- Attaches to air compressor to inflate tires in seconds - Designed with a variable rate trigger and a large, easy to read gauge - Spin-on Presta head with pressure release option and USA-made hose are included with Prestaflator - Prestaflator PLUS includes Schrader head and blower tip - Attachments are 6061-T6 alloy

The new Prestaflator Digital is made possible by Prestacycle's new Rapid Response Digital Gauge. During inflation, the gauge is capable of showing immediate changes in pressure, enabling fast inflation – now with supreme accuracy. The gauge uses highly accurate, non-wearing circuitry for pressure readings, so it does not wear-out or loose accuracy like traditional Dial gauges. Highly accurate readings are across the whole range, making this tool excellent for Fat Tire, Cyclocross, MTB as well as Road Bikes. Easy Tool-less replacement of the two CR2032 batteries (included).

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.

You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."

Planet Bike's Ozone ATB Comp Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.