Accessories/Parts

Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

- Adapters for mounting suspension forks to most auto bike racks - Solution to thru-axle issues or clearance problems between disc brakes & trays

Having trouble getting your non-traditional bike onto your trunk or hitch rack? Struggle no more with Hollywood's Bike Adapter Pro. It quickly attaches to most bikes to form a top tube and makes it easier than ever to safely and securely attach it to your rear rack.

Thru axle adaptor sleeve for StreetRod, HotRod & SwitchHitter. Simply loosen the screws, remove your existing axle and slide this in.

Replacement snap-in nylon shims for the RockyMounts DriveShaft product line. Shims enable DriveShafts to carry a thru-axle equipped bike. Shims can be used on RockyMounts DriveShaft, DriveShaft HM, and DriveShaft SD.

Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.

The Swiss Army of truck racks is now even better. Redesigned to save previous real estate in truck beds, the DriveShaft Track is better than ever before. 12mm, 15mm, 20mm thru-axle bike rack carrier for truck bed channels found in Toyota, Chevy, GMC, and Nissan. RockyMounts DriveShaft is the first on the market with the ability to carry 12/15/20mm thru-axles and to securely lock your bike. The mouth opens wide for easy loading and the cam lever adjusts like a quick release for a strong hold. Snap-in nylon shims prevent the axle from being unscrewed and allows you to switch between 12mm, 15mm, and 20mm loads.

Set of heavy duty wheel holders for Fat tire E-bikes and regular fat bikes for tires up to 5" wide

- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

Thru-axle adapter for the Kuat TRIO rack.

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

The RockyMounts LoBall Track is a hardcore bike rack solution for channel systems commonly found in Toyota, Nissan, Chevy, and GMC truck beds. It includes locking quick release, lock core, and two keys.

Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.

The new Hollywood Racks Truck Pad is designed to carry up to four bikes in the back of a pickup truck. At 53 inches, it will cover the tailgate of a compact truck and other larger pickups.

The RockyMounts LoBall is a ridiculously easy bike rack solution for trucks, trailers, vans, SUV's, and home storage. It includes a non-locking, 9mm chromoly quick release.

Hollywood's Single Bike Parking Stand is easy to assemble and simple to use. Roll your bike’s rear wheel into the stand and the bike is now fully supported. It fits most tire sizes including 29’rs and cruisers. - Max tire width: 2.5 inches - Powder-coated steel tubing - Assembles easily in just minutes - Features adjustable legs for uneven floors

Creating the world's most aerodynamic and colorful bike racks since 1993, we've leveraged our knowledge of the bike rack industry and it's ever changing technologies to create the world's most versatile and elegant platform hitch rack. Perfect for the bike enthusiast or recreational rider, the SplitRail Single Add On pairs with the 2" SplitRail to accommodate 3 or 4 bikes. Each add on is engineered with 4" of side-to-side adjustment, which makes fitting anything from kids to adult bikes simple and easy. An integrated cable lock secures bike to rack (lock core and keys included). 40lb max weight per bike with add on(s). 3-bike configuration: 12" spacing (on center) between bikes. 4-Bike configuration: 12" spacing (on center) between bikes one and two; 9" spacing (on center) between bikes two, three, and four. RockyMounts stands by its products by offering a lifetime warranty. - Compatible with 2" SplitRail (SKU 1140, sold separately) to expand carrying capacity to 3 bikes (requires oneAdd On) or 4 bikes (requires two Add Ons) - Lightweight chromoly and aluminum construction - Fits bikes with 20-29" wheels and "Plus" size tires. 48" max wheelbase - 4" of side-to-side tray adjustment for simple and easy loading and unloading of bicycles - Integrated cable lock secures bike to rack - Due to weight restrictions of 1.25" hitches, the SplitRail Single Add on can only be used with the 2" SplitRail - SplitRail rated 5 out of 5 stars on MTBR (August 2016) - RockyMounts offers a lifetime warranty on all of our products - Want to match keys to your existing SplitRail or any other RockyMounts products? Simply add your key number (ex. E144) in the "comments" field at checkout