Seatposts

Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.

Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.

On every trail, whether littered with technical descents, grinding climbs, or smooth rolling sections, Specialized's Command Post BlackLite lets you attack. It controls your seat height with the flick of a handlebar-mounted lever so you can maintain your flow at all times. There are three positions to choose from: up for climbing; down for jumping and steep descents; and a middle height when you need to pedal, but you want extra maneuverability too. The seatpost is sealed for reliability, and is controlled by a standard derailleur cable.

Giant's Vector Seatpost offers superb aerodynamics, low weight, and the vibration damping high-end carbon is known for. The adjustable clamp head can be set up to provide either -5 or 25mm offset without any additional parts or tools.

Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

FSA's Afterburner is a tough, lightweight seatpost that works great on road and mountain bikes. Its 1-piece 3D-forged aluminum construction makes it strong and stable while remaining light. And, it's super easy to adjust thanks to the convenient 2-bolt clamp.

- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

Ritchey's one-bolt Superlogic Carbon is one of the lightest, toughest seatpost designs in the world. - Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment - Precision forged alloy clamp assembly for strength - Low-profile head for optimal saddle clearance and sleek lines - Wide saddle clamp reduces stress on lightweight saddle rails - Interchangeable clamps provide compatibiliy for all popular rail sizes - Carbon Monocoque Construction - Available in 27.2, 30.9 & 31.6mm diameters - Available in 350 & 400mm lengths - 25mm Offset - 7x7mm saddle rail clamp included - Saddle Clamp Torque Spec: 12Nm - 148g (27.2/300)

Ritchey's Superlogic Carbon LINK reinvents the two-bolt seatpost, making it lighter, more compliant, and more versatile than ever. - Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter - LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness - 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment - Monocoque Carbon Construction - Diameters: 27.2, 30.9, 31.6mm - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Lengths: 350, 400mm - Matte UD carbon finish - 145g (27.2x350)

Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)

Ritchey's Classic Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Ritchey's "Classic" hi-polish silver finish - Two-bolt design for easy to adjust, vise-like grip - Low profile clamp reduces stress on lightweight rails and won't bottom out - Bolts oriented to the axis of the rails for greatest contact area with the saddle - 3D Forged 2014 - Available in 27.2, 30.9 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Hi-polish silver finish - 245g (27.2/350mm)

Ritchey's Comp Carbon Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Low profile clamp won't bottom out on saddle - Bolts are oriented to the axis of the rails for greatest contact area with saddle - Wide saddle clamp reduces stress on lightweight saddle rails - Works with a wide range of saddle rail dimensions - Press bonded carbon/6061 alloy - Available in 27.2 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Matte UD carbon finish - 229g (27.2/350mm)

It’s a traditional straight up pivotal design with a 200mm length.

Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined

The Cyrano R5 Seatpost is made using Ergal aluminum; a 7075-series aluminum, with a high strength-to-density ratio that has the highest level of stiffness. Ergal also has good fatigue resistance, particularly important in cockpit performance. The optimized cradle position and pivot balance ensures the same support and performance right through the widest range of seat tube and personal preference angles. Stainless steel bolts and thumb wheel adjustment combine security with easy micro adjust accuracy. The 25mm setback means direct positional replacement of most original fit seatposts. - Body Material: Aluminium-Ergal - Head Material: Aluminium-Ergal - Bolts: Stainless Steel - Diameter: 27.2; 31.6mm - Length: 330, 400mm - Setback: 25mm - Weight: 240g (330mm - 31.6mm)

New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. Additional bushing overlap also improves performance over time, while new 150- and 170-millimeter travel options are available to tame even the gnarliest of descents. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - 150mm and 170mm travel options available in all diameters - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 560g (weight based on 340mm post, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300mm hose) - LENGTH: 340mm, 390mm, 440mm, 480mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero Offset , Remote: Adjustable return speed at the handlebar, Discrete or Match Maker X, Left or right - AVAILABLE IN: Travel: 100/125/150/170mm ; Diameter: 30.9/31.6/34.9mm

New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 520g (Weight based on 340mm post length, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300 hose) - LENGTH: 340mm, 390mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero offset , remote: adjustable return speed at the handlebar, discrete or Match Maker X, left or right

The Specialized CG-R seatpost extends the concept that “Smoother is Faster.” This revolutionary post features 18mm of vertical compliance, Zertz vibration damping, and FACT carbon construction. The CG-R delivers unsurpassed comfort, control, and efficiency without adding weight or complication to the frame. No matter what surface your ride takes you on, the CG-R will make it better. - Revolutionary design allows 18mm of vertical compliance. - FACT carbon construction blends durability and comfort. - Vibration-damping Zertz for increased comfort. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - Diameter: 27.2mm

Specialized's Shiv Carbon Seatpost is crafted from Specialized's FACT carbon for a premium blend of ultra lightness, outstanding power transfer and vibration damping. And, its single-bolt clamp holds fast and makes seat adjustments easy. The Shiv Carbon Seatpost only fits Specialized Shiv bicycles.

Crafted from 2014 aluminum, Specialized's Pro 2 Alloy MTB Seatpost is tough and light. The laid-back, single-bolt adjusting clamp holds fast and makes attaching and positioning the seat a cinch. And, the anodized finish looks great, too.

Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm/ 400mm/ 465mm Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm)/ 560g (125mm)/ 610g (160mm) Warranty: 3 years

Specialized's Command Post IRCC, offers Cruiser Control technology. With ten micro-adjust positions, you'll always be able to find just the right saddle height for descending like Gwin or climbing like Sauser. - Patented mechanical locking system with the addition of Cruiser Control Technology. - Cruiser Control technology features added positions in the cruiser control range. - Bonded lightweight aluminum micro-adjustable “alien” style head. - Dual-keyway system eliminates saddle wiggle. - Energized triple-lip wiper prevents contamination. - Durable zero-gap, dual-lip x-ring internal seal ensures long-term durability. - Ships with SRL and grip mounted lever.

- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles

- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA

- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length

Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–0 places the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. Ionic–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - Alloy Difflock seat clamp fits only saddles with 7mm round-section rails - Clamp Style: Standard Rails - Color: Black

Stylus is a fresh new take on the 2-bolt seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. Stylus–0 models place the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The top model Stylus–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - High-modulus carbon-fiber seatpost - Two-bolt parallel clamp - Weight: 195 grams

Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–25 places the seat clamp assembly 25mm behind the seatpost’s centerline. This gives athletes the option of a more rearward position on today’s shorter framesets. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. The Ionic–25 Ltd is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - Monocoque high modulus carbon-fiber seatpost - Alloy Difflock seat clamp fits only saddles with 7mm round-section rails

Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–0 places the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. The Ionic–0 Pro is fabricated in aluminum alloy with a shot-peened, black-anodized finish. - Aluminum shaft with alloy Difflock seat clamp fits only saddles with 7mm round-section rails - Clamp Style: Standard Rails - Color: Black - Weight: 230 grams