Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.

- Bearing Type: Cartridge - Weight: 86 g - Crown Race: 40 - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g

Designed for bicycles with press-fit headsets, the Classic Press Fit Upper Headset features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Press Fit Upper headset adds that classy detail your bike deserves. - Top cap: 7.3 - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44mm - Bearing: Sealed cartridge - Finish: High-polish silver - Weight: 43g (7.3mm)

The WCS Logic Threadless Headset the reliable workhorse of the Ritchey threadless headset range. This smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree hybrid ceramic bearings with a titanium coating, and comes packed with Ritchey Grease and a sealed design that promises minimal penetration from the elements. - Bearing: Sealed cartridge (ACB) - Ti coated - Material: Alloy - Stack Height: 28.3mm

Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Lower assembly features: - Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions. - All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality. - Service and additional parts available.

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Wolf Tooth Precision Headsets for Trek Knock Block are machined in the USA out of aircraft grade aluminum with superior sealing for protection against the elements. Available in a variety of colors to add some style to your bike. These upper headsets are for Trek frames with molded-in internal bearing cups. - Designed to work with Trek's Knock Block system - The top cap on these headsets have unique raised features that key to Knock Block compatible stems (made by Bontrager - If spacers are needed, you will need to use special Knock Block compatible spacers with notch features - This product is the upper headset only - Lower headsets on bikes with Knock Block do not have any unique features. They are usually IS headsets which are available separately

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups. - Stainless steel Angular Contact Bearings - Stainless steel crown race - 1.5'' patented alignment tip for increased durability and performance - Deep Cup model has 22mm insertion of upper and lower cups

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and a nylon top cover - Hammer: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 12.8mm/11.9mm - Color: Black - Weight: 149g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: ZS44/28.6/H15/K|ZS44/30/H4/x • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 15mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 • Weight: 95.62g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. And, the 110 comes with an amazing 110-year, no-questions-asked warranty! - Technical Description: IS41/28.6/H9/x - Top Type: IS - Integrated - Top Head Tube Inside Dia.: 41.1mm - Stem Clamp Dia.: 28.6mm - Top Stack Height: 9mm (Short), 15mm (Tall) - Top Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 41.81g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. Technical Description: ZS56/30/H4/x Bottom Type: ZS - ZeroStack Bottom Head Tube Inside Dia.: 55.95mm Crown Race Seat Dia.: 30.015mm Crown Race Type: Aluminum, Dual-Seal Bottom Stack Height: 4mm Bottom Bearing Type: Top-quality, sealed stainless steel bearings Material: 7075 aluminum Weight: 61.34g Part Number: BAA0156x

This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Interlok spacer compatible - 110 year warranty

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: EC34/28.6/H16/x • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 34mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 55.26g

- Forged steel cups with caged 5/32" ball bearings - TH-857 features a alloy top cover - TH Series: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 14.9mm/11mm - Color: Black - Weight: 126g

FSA Standard Headset Bearings

Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Building upon Cane Creek's ongoing legacy of bicycle headset innovation, the introduction of the New Hellbender 70 Visco brings new patented steering stabilizing technology to a wide variety of cycling disciplines. Designed to reduce high-frequency oscillation of the bicycle steering assembly, known as speed wobble. The Cane Creek Hellbender 70 Visco headset helps riders maintain control, reduce fatigue and ride with confidence. -Stabilized steering with Cane Creek’s Patented headset damping technology; utilizing Micro-thin plates with fluorocarbon gel in between -Includes a pre-set “mid-tune” damping, each layer; Damping effects are tunable for rider preference -7075 T6 Aluminum construction -Sealed, stainless-steel Hellbender bearings

This is the Integrated Bottom Bearing for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC49/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 76g

This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1.5-inch crown race diameter - Stack height: 4mm - 54 grams

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g

The Revolver headset features a high precision CNC 6061 Aluminum bearing cover with triple rubber seals for a perfect fit. - Campy spec 45x45 sealed bearings - 15mm dust cover stack height - 2.7oz (76.54g) - Materials: Aluminum Cover, Chromoly Crown Race

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Performance Headsets with Enduro black oxide bearings have a one-year warranty. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Lower assembly features: - Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions. - All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality. - Service and additional parts available.

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Replacement headset uppers from FSA - Internal HS Upper Orbit-Z - Steerer diameter: 1-1/8" - ZS44/28.6 (36 x 45) - 5.3/13.1mm

The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap

ABI Headset Bearing for new builds or replacements.

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Upper assembly features: - Ultralight Stem Cap with Integrated Spacer plus an aluminum bolt and a star nut. - 7, 15, and 25mm stack height top cover options (7mm cover = 8mm total stack, 15mm cover = 15mm total stack, 25mm cover = - 25mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing. - bearing top cap outer diameter 45.8 mm

- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC34/28.6-26tpi|EC34/30 - Steerer Dia: 28.6mm - Cup Dia: 34mm - Race Dia: 30mm - Stack Ht: 40mm Size: 1-1/8"

FSA Standard Headset Bearings

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Hellbender 70 Lite headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 62.79g

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS41/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 41.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Weight: 24.91g

The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings. - Classic shape with modern styling for high-end road bikes - For threadless steerers - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - Laser etched aluminum top cap - Weight: 82g

Cannondale Headshok/Lefty Bearing

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g

Replacement headset uppers from FSA. - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Upper: IS41 - Upper Stack Height: 8.2

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Interlok spacer compatible - 110 year warranty

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets