Wheels

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.

- TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure - Minimum 25mm tire width - More than 300 g lighter than previous model - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - An all-out aero 80mm rim profile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Center locking rotor interface. Lockring is included - Lifetime warranty

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

- Rims: EVO Tour 20 - 26'' (ETRTO 559) - Inner width: 19.8 mm - Recommended tire size range: 26" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes - Rear hub (041820-02-26): Alloy, Sealed, Freewheel, Quick Release, Hollow CrMo axle M10x135mm - Rear hub (041820-03-26): Alloy, Sealed, Shimano HG compatible Freehub, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Grade 10 chromium steel balls

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle

- Lighter, wider, stronger and more flat resistant - Ride Tuned – Smoother ride improves tracking, control, and reduces fatigue - Wide hookless bead dissipates impact energy and prevents pinch flats. - 30% increase in impact toughness, 60% more flat resistant - Optimized for 2.3-2.5" tires - 385g (27.5"), 405g (29") - Rim Construction: Carbon - Brake Type: Disc - Tire Type: Tubeless Ready

Sleeved 30 mm Enduro rim, ready to eat rocks. Bringing wide profiles to the most demanding enduro riders, both price- and performance-wise. A sibling of our EWS-winning welded rims, the E 532 packs the materials and technology the worlds fastest racers use and puts it into an affordable rim for everyday chargers.

This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.

Replaceable hub guard for the Odyssey Vandero Pro and GSport Roloway front hubs. Made from a special proprietary plastic blend for increased durability. Sold individually. Features: - Proprietary Plastic - Press Fit

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.

The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true. - 25mm external rim width

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately

650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes. - Double-wall rims are strong and durable. - Machined braking surface creates superior stopping power in any condition. - Stainless spokes won't rust, easing long-term maintenance.

Rear Wheel Axle for X0 hubs, including the following wheels: Rise 60 (B1), Roam 30, Roam 40, Rail 40, Rise XX, Roam 50, 60 B1 Compatible with part numbers: HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1

Best value in quick-release disc wheels.

The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.

Silver anodized alloy rim w/ 32 holes - KT silver alloy road hub - Stainless steel spokes - QR wheel

Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.

- Wheel axle rear Zipp 176D Disc Brake (axle only)

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.

- Taiwan cruiser steel rims are 39mm wide, w/ 36 holes, 12G CP - Cruiser wheels use C/N 12G UCP heavy duty spokes w/ 5/8" brass nipples - Bolt on wheel

Sun Duroc 30 Disc blk 32h - -01: STW Turbo 6-Bolt disc - -02: STW Turbo Shimano 6-Bolt disc - -03: STW Turbo Boost 6-Bolt disc - -04: STW Turbo Boost Shimano 6-Bolt disc

- 27"x 1 1/4 alloy road wheels assembled in the USA - Alex AP18 silver anodized alloy 27" rims w/ 36 holes - Extremely strong dual cavity rim profile developed for Sta-TruWheels, Inc. - KT alloy road hub silver road hub - Offered with silver UCP spokes - QR wheel

The disc brake road revolution has arrived. The EA90 SL Disc combines the stout 19.5-millimeter internal tubeless EA90 SL rim with Easton’s M1 6-bolt disc hubs that have received an A+ Future-Proof rating by Velonews. Hubs easily converts from out of the box 9x100 and 10x135 quick release to 15x100 & 12x100; parts sold separately. These wheels are light, fast and bombproof. Best of all, they rely on standard Sapim double-butted straight-pull spokes and straight-pull spokes and standard external alloy nipples, so they’re easy to maintain and service.

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place

Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo and Neo Ultimate hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside diameter as other systems, but outside diameter is larger (31mm), making these end caps only compatible with Torque-Cap-compatible forks. Note: Torque caps are not compatible with centerlock hubs.

- Laced with Sapim Laser triple-butted spokes and mechanically locking alloy nipples. - M-pulse Hub - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for 2.00"-2.25" XC and Trail tires

- Alex MD21 double wall 26'', disc specific rim, Black - Formula DC-20/DC-22 hubs - For All-Mountain and Cross-Country - Tubeless Ready - Inner rim width: 21mm - Outer rim width: 26mm - Rim height: 18 mm - Rim weight: 450 g - With eyelets - Schrader Valve - 32 holes - Sapim Leader Stainless spokes—Black

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Made start to finish in Asheville, NC - Light weight and easy to service

Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos

- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.7mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Formula FM-21-QR - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width 25mm - Depth 16mm - Rim Model Alex X101 - Skewers Included Yes

- Quest centerlock hubs, Pillar Wing 20 spokes, and external nipples for the ideal gravel wheel set, built to withstand your hardest rides on your most adventurous weekends! - Wide rim platform for modern gravel tires. - Boasting a 26mm internal width, the updated Jocassee goes to a shallower and lighter 25mm depth. This allows the rim weight to go down to 353 grams in a 700c.

Sun Duroc 30 Disc blk 32h - -01: STW Turbo 6-Bolt disc - -02: STW Turbo Shimano 6-Bolt disc - -03: STW Turbo Boost 6-Bolt disc - -04: STW Turbo Boost Shimano 6-Bolt disc

- The Stumphouse is a bombproof MTB wheelset with a modern 30mm wide tubeless rim. - Stout lacing of 32 spokes front and rear means your only worry is making sure you have enough time to ride. - All Prologue series wheels are built on Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings. - The Skyuka MTB rear hub is available with a Shimano Hyperglide, Microspline or Sram XDR freehub body and requires no tools to swap between the different freehub body standards. - Built with Pillar TB2018 round double butted spokes and external brass nipples, the Stumphouse is a great budget upgrade that can be used for everyday trail riding.

Double wall 32 hole alloy rims - CNC machined sides and single stainless eyelets - KT alloy black MTB style hub - Stainless steel spokes

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT410-B (Boost, MS) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)